Electric or Silica Air Dryers

Dessicant Air Dryers

Model HD-5B Dessicant Air Dryer

The model HD-5B is a new dessicant air dryer designed for installations where there is opportunity to regenerate some time durng the night or other time slot where the capital ozonator is not required to be in opperation. Due to a new chamber design, there is now a 100% regeneration of the dessicant, even when saturated from too high a flow rate.

Model HD-5B Dessicant Air Dryer

Model HD-5B Dessicant Air Dryer
Call for pricing!
1-888-437-0311

or

Email: distiller
@
distillerwarehouse.com

  • Specifications:
    • A vaccuum source is required to draw air through dryer
    • 5 to 20 SCFH, at -50 degree F dewpoint, from 100% to 25% RH
    • Regeneration time: 2 to 3 hours heating, one hour cooling. Automatic heating with built-in timer. Easily set for "time of day"
    • 120 VAC 60 Hertz, 85VA. 230 VAC 60 Hertz at the same cost
    • Finish, white, non-gloss powder coat, baked on.
    • All hardware is stainless steel and aluminum
    • 12" high x 6-5/8" wide x 3-5/8" deep.
    • Shiping weight: 8.8 lbs. (4.0 Kgs.)
    • Maximum time of use between regeneration is 3-5 hours, depending on % RH

Dessicant Air Dryers

Model HD-20B Dessicant Air Dryer

The latest model of the HD-20B vacuum source dessicant air dryer has improvements to the case, heater, control board, and custom machine fittings, all designed to improve the quality of the dryer.

Model HD-20B Dessicant Air Dryer

Model HD-20B Dessicant Air Dryer
Call for pricing!
1-888-437-0311

or

Email: distiller
@
distillerwarehouse.com

  • Specifications:
    • A vaccuum source is required to draw air through dryer
    • To 40 SCFH, at -50 degree dewpoint, depending upon air flow and ambient humidity. 10 to 20 SCFH recommended in most climates
    • Automatic self regeneration when turned on and left on. No airflow required for regeneration.
    • 120 VAC 60 Hertz, 53VA average, 86 VA maximum. Available in 230 VAC, 50/60 Hertz at no additional cost.
    • Finish, white, non-gloss powder coat, baked on.
    • All hardware and fastenings are stainless steel
    • 11-1/4" high (including mounts) x 13" wide x 3-7/8" deep.
    • Shiping weight: 12.5 lbs. (5.6 Kgs.)
Go to Top